TIBCO Spotfire - License Agreement
READ THIS END USER LICENSE AGREEMENT CAREFULLY. BY DOWNLOADING OR INSTALLING THE SOFTWARE, YOU
AGREE TO BE BOUND BY THIS AGREEMENT. IF YOU DO NOT AGREE TO THESE TERMS, DO NOT DOWNLOAD OR
INSTALL THE SOFTWARE AND RETURN IT TO THE VENDOR FROM WHICH IT WAS PURCHASED.
Upon your acceptance as indicated above, the following shall govern your use of the Software
except to the extent all or any portion of the Software (a) is subject to a separate written
agreement, or (b) is provided by a third party under the terms set forth in an Addenda at the end
of this Agreement, in which case the terms of such addenda shall control over inconsistent terms
with regard to such portion(s).
License Grant. The Software is the property of TIBCO or its licensors and is protected by
copyright and other laws. While TIBCO continues to own the Software, TIBCO hereby grants to
Customer a limited, non-transferable, non-exclusive, license to use the Number of Units set forth
in the Ordering Document solely for Customer’s internal business use.
License Term. The term of each license for the Software shall be either perpetual or on a term
limited basis as set forth in the Ordering Document. If licensed on a term limited basis, the
term shall be for a period of three years commencing on the Purchase Date, and on expiration,
Customer must cease using and return or destroy all copies of the Software.
Restrictions. Customer agrees not to (a) make more copies than the Number of Units (except for a
reasonable number of copies for archival and disaster recovery purposes) or use any unlicensed
versions of the Software; (b) provide access to the Software to anyone other than employees,
contractors, or consultants under written contract with Customer agreeing to be bound by terms at
least as protective of TIBCO as those in this End User License Agreement (“Authorized Users”);
(c) sublicense, transfer, assign, distribute to any third party, pledge, lease, rent, or
commercially share the Software or any of Customer’s rights under this Agreement (for the
purposes of the foregoing a change in control of Customer is deemed to be an assignment); (d) use
the Software for purposes of providing a service bureau, including, without limitation, providing
third-party hosting, or third-party application integration or application service provider-type
services, or any similar services; (e) use the Software in connection with ultrahazardous
activities, or any activity for which failure of the Software might result in death or serious
bodily injury to Customer or a third party; or (f) directly or indirectly, in whole or in part,
modify, translate, reverse engineer, decrypt, decompile, disassemble, make error corrections to,
create derivative works based on, or otherwise attempt to discover the source code or underlying
ideas or algorithms of the Software. Customer may engage in such conduct as is necessary to
ensure the interoperability of the Software as required by law, provided that prior to commencing
any decompilation or reverse engineering of any Software, Customer agrees to it shall observe
strict obligations of confidentiality and provide TIBCO reasonable advance written notice and the
opportunity to assist with and/or conduct such activity on Customer’s behalf and at Customer's
expense; and (g) notwithstanding the method of delivery of the Software, the scope of the
licenses granted under this Agreement are limited to the Software as set forth in an Ordering
Document.
Beta and Evaluation Licenses. Notwithstanding the foregoing, if the Software is being provided
for demonstration, beta testing, or evaluation purposes, then Customer agrees (a) to use the
Software solely for such purposes, (b) that the Software will not be used or deployed in a
production or development environment, and (c) that such use shall automatically terminate upon
the earlier of thirty days from the date Customer receives the right to install the Software, or
Customer’s receipt of notice of termination from TIBCO.
Maintenance. Maintenance, if ordered, including first year and all subsequent years, is provided
under the policies set forth in the Maintenance Program Guide in effect at the time Maintenance
services are provided. The policies set forth in the Maintenance Program Guide, incorporated in
this Agreement, are subject to change at TIBCO’s discretion; however the level of Maintenance
service provided by TIBCO will not be materially reduced during the period for which Maintenance
fees have been paid by Customer. The current version of the Maintenance Program Guide can be
accessed at <http://www.tibco.com/services/support/default.jsp>. To receive Maintenance, all

Page 1

Software must be properly licensed and annual Maintenance fees paid. TIBCO is not obligated to
continue providing Maintenance if annual Maintenance fees have not been paid.
Services. Customer may request additional services (“Services”) either in an Ordering Document,
or by a separate mutually executed work order, statement of work or other work-request document
incorporating the term of this End User License Agreement (each, a “Work Order”). Unless
otherwise expressly agreed to in a Work Order, all Services and any work product therefrom shall
be (a) performed on a time and materials basis, plus meals, lodging, travel, and other expenses
reasonably incurred in connection therewith, (b) deemed accepted upon delivery, and (c)
exclusively owned by TIBCO (except for Confidential Information of Customer), including all right,
title and intellectual property or other right or interest therein. Each Work Order is intended
to constitute an independent and distinct agreement of the parties, notwithstanding that each
shall be construed to incorporate all applicable provisions of this End User License Agreement.
Limited Warranty. If Customer obtained the Software directly from TIBCO, then TIBCO warrants that
for a period of thirty (30) days from the Purchase Date: (i) the media on which the Software is
furnished will be free of defects in materials and workmanship under normal use; and (ii) the
Software will substantially conform to its Documentation. This limited warranty extends only to
the original Customer hereunder. Customer’s sole and exclusive remedy and the entire liability of
TIBCO and its licensors under this limited warranty will be, at TIBCO’s option, repair,
replacement, or refund of the Software and applicable Maintenance fees, in which event this End
User License Agreement shall terminate upon refund thereof.
This warranty does not apply to any Software which (a) is licensed for beta, evaluation, testing
or demonstration purposes for which TIBCO does not receive a license fee, (b) has been altered or
modified, except by TIBCO, (c) has not been installed, operated, repaired, or maintained in
accordance with instructions supplied by TIBCO, (d) has been subjected to abnormal physical or
electrical stress, misuse, negligence, or accident, or (e) is used in violation of any other term
of this End User License Agreement. Customer agrees to pay TIBCO for any Maintenance or Services
provided by TIBCO related to a breach of the foregoing on a time, materials, travel, lodging and
other reasonable expenses basis. If Customer obtained the Software from a TIBCO reseller or
distributor, the terms of any warranty shall be as provided by such reseller or distributor, and
TIBCO provides Customer no warranty with respect to such Software.
EXCEPT AS SPECIFIED IN THIS LIMITED WARRANTY, THE SOFTWARE, MAINTENANCE AND SERVICES ARE PROVIDED
“AS IS”, ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS, AND WARRANTIES INCLUDING, WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, NONINFRINGEMENT, SATISFACTORY QUALITY OR ARISING FROM A COURSE OF DEALING, USAGE, OR
TRADE PRACTICE, ARE HEREBY EXCLUDED TO THE EXTENT ALLOWED BY APPLICABLE LAW. CERTAIN THIRD PARTY
SOFTWARE MAY BE PROVIDED TO CUSTOMER ALONG WITH CERTAIN TIBCO SOFTWARE AS AN ACCOMMODATION TO
CUSTOMER. THIS THIRD PARTY SOFTWARE IS PROVIDED “AS IS”. CUSTOMER MAY CHOOSE NOT TO USE THIRD
PARTY SOFTWARE PROVIDED AS AN ACCOMMODATION BY TIBCO. NO WARRANTY IS MADE REGARDING THE RESULTS
OF ANY SOFTWARE, MAINTENANCE OR SERVICES OR THAT THE SOFTWARE WILL OPERATE WITHOUT ERRORS,
PROBLEMS OR INTERRUPTIONS, OR THAT ERRORS OR BUGS IN THE SOFTWARE WILL BE CORRECTED, OR THAT THE
SOFTWARE’S FUNCTIONALITY, MAINTENANCE OR SERVICES WILL MEET CUSTOMER’S REQUIREMENTS. NO TIBCO
DEALER, DISTRIBUTOR, AGENT OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATIONS, EXTENSIONS OR
ADDITIONS TO THIS WARRANTY.
Indemnity. If Customer obtained the Software from TIBCO directly, then TIBCO agrees at its own
expense to defend or, at its option, to settle, any claim or action brought against Customer to
the extent it is based on a claim that the unmodified Software infringes any patent issued by the
United States, Canada, Australia, Japan, or any member of the European Union, or any copyright,
or any trade secret of a third party; and TIBCO will indemnify and hold Customer harmless from
and against any damages, costs and fees reasonably incurred (including reasonable attorneys’
fees) that are attributable to such claim or action and which are assessed against Customer in a
final judgment; provided that TIBCO is promptly notified in writing of such claim, TIBCO has the
exclusive right to control such defense and/or settlement, and Customer shall provide reasonable
assistance (at TIBCO's expense) in the defense thereof. In no event shall Customer settle any
claim, action or proceeding without TIBCO's prior written approval. In the event of any such
claim, litigation or threat thereof, TIBCO, at its sole option and expense, shall (a) procure for
Customer the right to continue to use the Software or (b) replace or modify the Software with

Page 2

functionally equivalent software. If such settlement or modification is not commercially
reasonable (in the reasonable opinion of TIBCO), TIBCO may cancel this End User License Agreement
upon sixty days prior written notice to Customer, and refund to Customer the unamortized portion
of the license fees paid to TIBCO by Customer based on a five-year straight-line depreciation.
This Section states the entire liability of TIBCO with respect to the infringement of any
intellectual property rights, and Customer hereby expressly waives any other liabilities or
obligations of TIBCO with respect thereto. The foregoing indemnity shall not apply to the extent
any infringement could have been avoided by use of the then-current release.
Limitation of Liability. EXCEPT AS PROVIDED UNDER INDEMNITY OR RESULTING FROM A BREACH OF
CONFIDENTIALITY (THE “EXCLUDED MATTERS”), IN NO EVENT WILL EITHER PARTY OR TIBCO’S LICENSORS BE
LIABLE FOR ANY LOST DATA, LOST REVENUE, LOST PROFITS, DAMAGE TO REPUTATION, BUSINESS INTERRUPTION,
OR ANY OTHER INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, PUNITIVE, EXEMPLARY OR ANY SIMILAR
TYPE DAMAGES ARISING OUT OF THIS AGREEMENT, THE USE OR THE INABILITY TO USE THE SOFTWARE, OR THE
PROVISION OF ANY MAINTENANCE OR SERVICES, EVEN IF A PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. EXCEPT FOR THE EXCLUDED MATTERS, IN NO EVENT SHALL A PARTY BE LIABLE TO THE OTHER,
WHETHER IN CONTRACT, TORT (INCLUDING ACTIVE OR PASSIVE NEGLIGENCE), BREACH OF WARRANTY, CLAIMS BY
THIRD PARTIES OR OTHERWISE, EXCEED THE PRICE PAID BY CUSTOMER UNDER THE APPLICABLE ORDERING
DOCUMENT.
THE FOREGOING LIMITATIONS SHALL APPLY EVEN IF THE ABOVE-STATED REMEDY OR LIMITED WARRANTY FAILS
OF ITS ESSENTIAL PURPOSE. BECAUSE SOME STATES OR JURISDICTIONS DO NOT ALLOW LIMITATION OR
EXCLUSION OF CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO CUSTOMER.
Confidentiality. “Confidential Information” means the terms of this End User License Agreement;
all information marked by the disclosing party as proprietary or confidential; any provided
software, related documentation or related performance test results derived by Customer; and any
methods, concepts or processes utilized in provided software or related documentation.
Confidential Information shall remain the sole property of the disclosing party and shall not be
disclosed to any non-Authorized User of either TIBCO or Customer without the prior written
consent of the disclosing party. If Confidential Information is communicated orally, such
communication shall be confirmed as "Confidential" in writing within thirty days of such
disclosure. The parties agree to protect the Confidential Information of the other in the same
manner it protects the confidentiality of similar information and data of its own (and at all
times exercising at least a reasonable degree of care). Except with respect to the Software,
items will not be deemed Confidential Information if (i) available to the public other than by a
breach of an agreement with TIBCO, (ii) rightfully received from a third party not in breach of
any obligation of confidentiality, (iii) independently developed by one party without use of the
Confidential Information of the other; (iv) known to the recipient at the time of disclosure
(other than under a separate confidentiality obligation); or (v) produced in compliance with
applicable law or court order, provided the other party is given reasonable notice of the same.
Both parties agree to indemnify the other for any damages the other may sustain resulting from
their unauthorized use and/or disclosure of the other’s Confidential Information. Such damages
shall include reasonable expenses incurred in seeking both legal and equitable remedies. To the
extent required by law, at Customer’s request, TIBCO shall provide Customer with the interface
information needed to achieve interoperability between the Software and another independently
created program, on payment of TIBCO's applicable fee. Customer agrees to observe obligations of
confidentiality with respect to such information.
To the extent TIBCO is exposed to individual personal data owned or otherwise held by Customer
during the provision of Services, which is subject to various data protection laws and/or
regulations ("Protected Data"), TIBCO agrees to treat such Protected Data in accordance with the
Customer Privacy and Security Statement set forth at
<http://www.tibco.com/customer_privacy_security_statement.jsp> (the "Statement"). The policies
and procedures set forth in the Statement as well as those set forth in the Data Protection
Policy Statement at <http://www.tibco.com/resources/data_protection_statement.pdf> are in place
to meet TIBCO’s obligations for the protection, integrity and confidentiality of any Protected
Data which exceed TIBCO’s standard obligations to safeguard Confidential Information.
Export. Software, including technical data, is subject to U.S. export control laws, including the
U.S. Export Administration Act and its associated regulations, and may be subject to export or

Page 3

import regulations in other countries. Customer agrees to comply strictly with all such
regulations and agrees to obtain all necessary licenses to export, re-export, or import Software.
Government Use. If the Software, Maintenance or Services are being or have been acquired with
U.S. Federal Government funds, or Customer is an agency, department, or other entity of the
United States Government ("Government"), the use, duplication, reproduction, release,
modification, disclosure or transfer of the Software, Maintenance or Services, or any related
documentation of any kind, including technical data, or manuals, is restricted in accordance with
Federal Acquisition Regulation 12.212 for civilian agencies and Defense Federal Acquisition
Regulation Supplement 227.7202 for military agencies. The Software, Maintenance and Services are
COMMERCIAL ITEMS AS DEFINED BY THE FEDERAL ACQUISITION REGULATION. Use of the Software,
Maintenance and Services by the Government is further restricted according to the terms of this
Agreement and any amendment hereto.
Orders. An Ordering Document means any purchase order, similar document or agreement requesting
Software, Maintenance or Services, which shall be deemed accepted only by issuance of a TIBCO
invoice and solely for purposes of administrative convenience. None of the terms of the Ordering
Document (other than the Software product name, Number of Units, level of Maintenance,
description of Services, and fees due in connection therewith) shall apply for any reason or
purpose whatsoever, regardless of any statement on any Ordering Document to the contrary, unless
countersigned by an officer of TIBCO. This Agreement constitutes the entire agreement between the
parties with respect to the use of the Software, Maintenance and Services, and supersedes all
proposals, oral or written, and all other representations, statements, negotiations and
undertakings relating to the subject matter hereof. All orders of Software, Maintenance or
Services by Customer to TIBCO shall be deemed to occur with or without reference to, under the
terms of this End User License Agreement, unless expressly superseded by a signed written
agreement between the parties. Neither the license to use the Software granted in this Agreement
nor the obligation to pay the license fees set forth above are dependent upon the performance by
any party of any Services or the supply of any other software program or product. Software shall
be delivered electronically, and delivery deemed complete when the Software is made available for
download by Customer.
Termination. Maintenance or Services may be terminated: (a) by either party upon a default of the
other, such default remaining uncured for fifteen days from written notice from the nondefaulting party; (b) upon the filing for bankruptcy or insolvency of the other party, (c) by
either party upon prior written notice at least sixty (60) days prior to the end of any annual
Maintenance term; or (d) by Customer (for Services), upon ten days prior written notice or 30
days prior written notice by TIBCO. Termination of Maintenance or Services shall not terminate
this End User License Agreement. Customer may terminate this End User License Agreement in its
entirety at any time by destroying all copies of the Software. Upon termination or expiration of
this End User License Agreement in its entirety, for any reason, Customer must cease using and
return or destroy all copies of the Software. Customer’s obligation to pay accrued charges and
any fees due as of the date of termination, as well as the sections entitled “Confidentiality”,
“Limited Warranty” and “Limitation of Liability” shall survive any such termination.
Authority. You hereby represent and warrant that you have full power and authority to accept the
terms of this End User License Agreement on behalf of Customer, and that Customer agrees to be
bound by this End User License Agreement.
Definitions. In connection with this End User License Agreement Software product definitions are
as set forth at <http://tibco.com/software/productdefinitions.jsp> which are hereby incorporated
into the End User License Agreement and the following capitalized terms shall have the following
meaning: “Customer” means the original purchaser or licensee of the Software and any permitted
successors and assigns; “Documentation” means text material that accompanies the Software on
delivery, which describes how to make use of that software. “Enterprise” means an unlimited
Number of Units of the Software set forth in an Ordering Document as Enterprise, to be deployed
by Customer during a period of one year (or such other period of time set forth in the Ordering
Document) from the Purchase Date (the “Enterprise Term”), at which time, the Number of Units then
deployed in Production and Non-Production use by Customer becomes fixed and Customer may not
thereafter deploy additional Units. During the Enterprise Term, Customer’s right to deploy an
unlimited Number of Units does not extend to any entity which acquires, is acquired by, merged

Page 4

into, or otherwise combined with Customer. Customer hereby agrees to provide TIBCO, within sixty
(60) days after the end of the Enterprise Term, with written notice of the Number of Units
deployed at the end of the Enterprise Term by Unit and License Type. In the event Customer
elects to renew Maintenance (subject to the section entitled “Term and Termination”), then during
the Enterprise Term and for the first annual renewal thereafter, TIBCO agrees the annual
Maintenance fee for the Software licensed on an Enterprise basis shall not increase by more than
the percentage rate change in the United States Department of Labor - Consumer Price Index for
All Urban Consumers (CPI-U) for the twelve month period immediately preceding the anniversary
date of Maintenance. “Purchase Date” means the date the Ordering Document is accepted by TIBCO.
“Project” means an unlimited Number of Units of the Software set forth in an Ordering Document as
Project, to be deployed by Customer solely in connection with the description and scope of the
Customer project set forth in the Ordering Document, during a period of one year (or such other
time period set forth in the Ordering Document) from the Purchase Date (the “Project Term”), at
which time, the Number of Units then deployed in Production and Non-Production use by Customer
becomes fixed and Customer may not thereafter deploy additional Units. During the Project Term,
Customer’s right to deploy an unlimited Number of Units does not extend beyond the scope of the
Project as set forth herein or to any entity which acquires, is acquired by, merged into, or
otherwise combined with Customer. Customer hereby agrees to provide TIBCO, within sixty (60) days
after the end of the Project Term, with written notice of the Number of Units deployed at the end
of the Project Term by Unit and License Type. In the event Customer elects to renew Maintenance
(subject to the section entitled “Term and Termination”), then during the Project Term and for
the first annual renewal thereafter, TIBCO agrees the annual Maintenance fee for the Software
licensed on a Project basis shall not increase by more than the percentage rate change in the
United States Department of Labor - Consumer Price Index for All Urban Consumers (CPI-U) for the
twelve month period immediately preceding the anniversary date of Maintenance. “Severity” means
the impact levels of an error, defect or malfunction, which under Maintenance are determined by
TIBCO as follows: “Severity 1” is an emergency production situation where the Software is totally
inoperable or fails catastrophically and there is no workaround; “Severity 2” is a detrimental
situation (and there is no workaround) where (a) performance degrades substantially under
reasonable loads causing a severe impact on use, (b) the Software is usable but materially
incomplete; or (c) one or more mainline functions or commands is inoperable; “Severity 3” is
where the Software is usable, but does not provide a function in the most convenient manner; and
“Severity 4” is a minor problem or documentation error. “Software” means the most current,
generally available object code version on all Platforms then currently available. Software does
not include multiple Platforms if the software product licensed on a Platform specific basis as
designated in the Software product
name or as otherwise listed in an Ordering Document,
including its Documentation and any subsequent Updates provided under Maintenance. For the
purposes of the product definitions where “TIBCO Software” or “Licensor Software” is used it
shall have the same meaning as “Software”. “TIBCO” means TIBCO Software Inc. and any entities,
regardless of corporate status, controlled by, controlling, or under common control with TIBCO
Software Inc. “Updates” means Software bug fixes, enhancements, and updates, if and when made
generally available by TIBCO. Updates provided under Maintenance, warranty or which are provided
for any other reason by TIBCO, or TIBCO’s authorized resellers or distributors (if applicable),
are subject to the license rights, limitations and restrictions of the End User License Agreement.
Special Product Provision. Embedded/Bundled Products. Some Software embeds or bundles other
Software. Use of such embedded or bundled Software is solely to enable the functionality of the
Software licensed under this Agreement, and may not be used or accessed by any other Software, or
for any other purpose. Bundle. A collection of Software listed in TIBCO’s then current price
book to be sold together under a collective name such as “XXX Bundle” which consists of X, Y and
Z. The Software which comprises a Bundle must be used in accordance with any specific license
restrictions imposed in this Agreement and solely in conjunction with the components of the
Bundle; provided that a Bundle component may be accessed by or communicate with other Software
separately licensed by Customer. In no event may the Software which comprises a Bundle be used on
a standalone basis. A “Bundle” is sold at a discount to the cost of licensing the individual
components due to the restrictions imposed on the use of the Bundle by this section and any
specific license restrictions imposed by this Agreement. If the terms of this Agreement with
regard to a Bundle are breached, and such breach is not cured within ten (10) days of TIBCO
notifying Customer in writing of the breach, TIBCO shall be entitled to invoice Customer for the
list price of the individual components of the Bundle based upon the manner in which Customer has
deployed and is making use of the components. Open Source Software. If Customer uses open source

Page 5

software or any other third party software not supplied by TIBCO in conjunction with the Software,
Customer must ensure that its use does not: (i) create, or purport to create, obligations of use
with respect to the Software; or (ii) grant, or purport to grant, to any third party any rights
to or immunities under TIBCO’s intellectual property or proprietary rights in the Software.
Customer also may not combine Software with programs licensed under the GNU General Public
License ("GPL") in any manner that could cause, or could be interpreted or asserted to cause, the
Software or any modifications thereto to become subject to the terms of the GPL. Third Party
Software. Third Party Software means third-party software identified by its company and/or
product name, the provision of which by TIBCO is made solely as an accommodation and in lieu of
Customer purchasing a license to Third Party Software directly from the third party vendor.
General. All payments of fees due shall be made in U.S. dollars, net 30 from Purchase Date, or,
for any other amounts coming due hereafter, net 30 from TIBCO’s invoice. Fees do not include
sales, use, withholding, value-added or similar taxes, and Customer agrees to pay all sales, use,
value-added, goods and services, consumption, withholding, excise and any other similar taxes or
government charges, exclusive of TIBCO’s income tax. Customer agree to pay all reasonable costs
incurred (including reasonable attorneys’ fees) in collecting past due amounts. Except as set
forth in the sections entitled “Limited Warranty” and “Indemnity” all fees paid under or in
connection with this End User License Agreement are non-refundable and no right of set-off exists.
A service charge of one and one-half percent per month will be applied to all invoices that are
not paid on time. No delay in the performance of any obligation by either party, excepting all
obligations to make payment, shall constitute a breach of this End User License Agreement to the
extent caused by force majeure. Customer hereby grants TIBCO and its independent auditors the
right to audit Customer’s compliance with this End User License Agreement. If any portion of this
End User License Agreement is found to be void or unenforceable, the remaining provisions shall
remain in full force and effect.
Governing Law. This End User License Agreement shall be governed by and construed in accordance
with the laws of the State of California, United States of America, as if performed wholly within
the state and without giving effect to the principles of conflict of law. The United Nations
Convention on Contracts for the International Sale of Goods is excluded from application hereto.
Version Apr 2008
Copyright © 1994-2010 TIBCO Software Inc. ALL RIGHTS RESERVED.

Third Party Software Notices and License Agreements
Antlr Runtime for .Net 3.0.1
Copyright (c) 2003-2007, Terence Parr
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
•
•

•

Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
Neither the name of the author nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Page 6

Log4net 1.2.10
OpenAjax Hub 2.0
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction, and distribution
as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by the copyright owner
that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all other entities that
control, are controlled by, or are under common control with that entity. For the
purposes of this definition, "control" means (i) the power, direct or indirect, to
cause the direction or management of such entity, whether by contract or otherwise,
or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii)
beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions
granted by this License.
"Source" form shall mean the preferred form for making modifications, including but
not limited to software source code, documentation source, and configuration files.
"Object" form shall mean any form resulting from mechanical transformation or translation
of a Source form, including but not limited to compiled object code, generated documentation,
and conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or Object form, made
available under the License, as indicated by a copyright notice that is included
in or attached to the work (an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object form, that is
based on (or derived from) the Work and for which the editorial revisions, annotations,
elaborations, or other modifications represent, as a whole, an original work of authorship.
For the purposes of this License, Derivative Works shall not include works that remain
separable from, or merely link (or bind by name) to the interfaces of, the Work and
Derivative Works thereof.
"Contribution" shall mean any work of authorship, including the original version
of the Work and any modifications or additions to that Work or Derivative Works thereof,
that is intentionally submitted to Licensor for inclusion in the Work by the copyright
owner or by an individual or Legal Entity authorized to submit on behalf of the copyright
owner. For the purposes of this definition, "submitted" means any form of electronic,
verbal, or written communication sent to the Licensor or its representatives, including
but not limited to communication on electronic mailing lists, source code control
systems, and issue tracking systems that are managed by, or on behalf of, the Licensor
for the purpose of discussing and improving the Work, but excluding communication
that is conspicuously marked or otherwise designated in writing by the copyright
owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of
whom a Contribution has been received by Licensor and subsequently incorporated within
the Work.
2. Grant of Copyright License. Subject to the terms and conditions of this License,
each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge,
royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works
of, publicly display, publicly perform, sublicense, and distribute the Work and such
Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of this License,
each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge,
royalty-free, irrevocable (except as stated in this section) patent license to make,
have made, use, offer to sell, sell, import, and otherwise transfer the Work, where

Page 7

such license applies only to those patent claims licensable by such Contributor that
are necessarily infringed by their Contribution(s) alone or by combination of their
Contribution(s) with the Work to which such Contribution(s) was submitted. If You
institute patent litigation against any entity (including a cross-claim or counterclaim
in a lawsuit) alleging that the Work or a Contribution incorporated within the Work
constitutes direct or contributory patent infringement, then any patent licenses
granted to You under this License for that Work shall terminate as of the date such
litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative
Works thereof in any medium, with or without modifications, and in Source or Object
form, provided that You meet the following conditions:
(a) You must give any other recipients of the Work or Derivative Works a copy
of this License; and
(b) You must cause any modified files to carry prominent notices stating that
You changed the files; and
(c) You must retain, in the Source form of any Derivative Works that You distribute,
all copyright, patent, trademark, and attribution notices from the Source form of
the Work, excluding those notices that do not pertain to any part of the Derivative
Works; and
(d) If the Work includes a "NOTICE" text file as part of its distribution,
then any Derivative Works that You distribute must
include a readable copy
of the attribution notices contained within such NOTICE file, excluding those notices
that do not
pertain to any part of the Derivative Works, in at least one
of the following places: within a NOTICE text file distributed as part of the Derivative
Works; within the Source form or documentation, if provided along with the Derivative
Works; or, within a display generated by the Derivative Works, if and wherever such
third-party notices normally appear. The contents of the NOTICE file are for informational
purposes only and do not modify the License. You may add Your own attribution notices
within Derivative Works that You distribute, alongside or as an addendum to the NOTICE
text from the Work, provided that such additional attribution notices cannot be construed
as modifying the License.
You may add Your own copyright statement to Your modifications and may provide additional
or different license terms and conditions for use, reproduction, or distribution
of Your modifications, or for any such Derivative Works as a whole, provided Your
use, reproduction, and distribution of the Work otherwise complies with the conditions
stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution
intentionally submitted for inclusion in the Work by You to the Licensor shall be
under the terms and conditions of this License, without any additional terms or conditions.
Notwithstanding the above, nothing herein shall supersede or modify the terms of
any separate license agreement you may have executed with Licensor regarding such
Contributions.
6. Trademarks. This License does not grant permission to use the trade names, trademarks,
service marks, or product names of the Licensor, except as required for reasonable
and customary use in describing the origin of the Work and reproducing the content
of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing,
Licensor provides the Work (and each
Contributor provides its Contributions)
on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
or implied, including, without limitation, any warranties or conditions of TITLE,
NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely
responsible for determining the
appropriateness of using or redistributing the

Page 8

Work and assume any risks associated with Your exercise of permissions under this
License.
8. Limitation of Liability. In no event and under no legal theory, whether in tort
(including negligence), contract, or otherwise,
unless required by applicable
law (such as deliberate and grossly negligent acts) or agreed to in writing, shall
any Contributor be liable to You for damages, including any direct, indirect, special,
incidental, or consequential damages of any character arising as a result of this
License or out of the use or inability to use the Work (including but not limited
to damages for loss of goodwill, work stoppage, computer failure or malfunction,
or any and all other commercial damages or losses), even if such Contributor has
been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative
Works thereof, You may choose to offer,
and charge a fee for, acceptance of
support, warranty, indemnity, or other liability obligations and/or rights consistent
with this
License. However, in accepting such obligations, You may act only
on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor,
and only if You agree to indemnify, defend, and hold each Contributor harmless for
any liability
incurred by, or claims asserted against, such Contributor by reason
of your accepting any such warranty or additional liability.

jQuery 1.6.2
Copyright (c) 2011 John Resig, http://jquery.com/
Permission is hereby granted, free of charge, to any person obtaininga copy of this software and
associated documentation files (the"Software"), to deal in the Software without restriction,
includingwithout limitation the rights to use, copy, modify, merge, publish,distribute,
sublicense, and/or sell copies of the Software, and topermit persons to whom the Software is
furnished to do so, subject tothe following conditions:The above copyright notice and this
permission notice shall beincluded in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
ANDNONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BELIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTIONOF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
OF OR IN CONNECTIONWITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

jQuery UI 1.8.7
Copyright (c) 2010 Paul Bakaus, http://jqueryui.com/
This software consists of voluntary contributions made by manyindividuals (AUTHORS.txt,
http://jqueryui.com/about) For exactcontribution history, see the revision history and logs,
availableat http://jquery-ui.googlecode.com/svn/Permission is hereby granted, free of charge, to
any person obtaininga copy of this software and associated documentation files (the"Software"),
to deal in the Software without restriction, includingwithout limitation the rights to use, copy,
modify, merge, publish,distribute, sublicense, and/or sell copies of the Software, and topermit
persons to whom the Software is furnished to do so, subject tothe following conditions:The above
copyright notice and this permission notice shall beincluded in all copies or substantial
portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
ANDNONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BELIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTIONOF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
OF OR IN CONNECTIONWITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Page 9

OpenAjax Hub 2.0 Specification
Copyright 2007-2009 OpenAjax Alliance. This software includes the OpenAjax Hub specification,
which can be found at
http://www.openajax.org/member/wiki/OpenAjax_Hub_2.0_Specification_Managed_Hub_APIs

Page 10

